Meaning
Mechanical wear on tool steel surfaces represents a physical degradation pattern occurring within the constrained flow channel directly preceding a mold cavity. High shear stress forces filled resin formulations or hard particle additives against the steel walls, causing gate land scoring over extended production cycles. Surface abrasion creates microscopic grooves that alter localized wall friction, distorting shear heating rates and melt velocity.
The boundary of this physical defect remains localized to the parallel steel relief zone directly downstream of the orifice entry, ending where the cavity expands into the part wall geometry.
Frictional Degradation
Abrasive reinforcement materials such as glass fibers and mineral fillers accelerate metal contact wear during injection steps. Unfilled resins cause negligible scoring, whereas highly loaded polyamides generate distinct grooves within fifty thousand cycles. Tool coatings like titanium nitride raise surface hardness to reduce wear rates.
Pressure Differential
Polymer melt passing through a narrow land experiences pressure drops that compound physical surface friction. When gate land scoring alters wall roughness, local melt flow resistance decreases, causing uneven mold filling and localized flash. Pressure sensors detect pressure drops as friction changes along the land.
Maintenance Threshold
Tool steel restoration requires polishing once groove depth exceeds five micrometers. Uncorrected gate land scoring leads to dimensional drift across long production runs.