Meaning
The federal regulation that defines the allowable ingredients and extraction limits for rubber articles intended for repeated food contact ensures that materials do not transfer harmful substances to consumables. This specific standard, known as fda 21 cfr 177.2600, applies to seals, gaskets, and tubes used in food processing machinery. Elastomers must comply with these rules to be legally sold for food-contact applications in the United States.
Extraction Requirement
The regulatory framework demands rigorous laboratory testing using distilled water and n-hexane to simulate exposure to aqueous and fatty foods. To meet the requirements of fda 21 cfr 177.2600, the rubber article must not exceed specific extraction limits during both initial and succeeding extraction cycles. These limits are measured in milligrams per square inch of rubber surface area.
If the extractable levels are too high, the compound is rejected.
Material Selection
Compounding chemists must choose elastomers, plasticizers, and vulcanization agents from the list of permitted substances outlined in the regulation. Silicone, nitrile, and fluorocarbon rubbers can be formulated to meet fda 21 cfr 177.2600 by selecting high-purity raw materials. Avoidance of non-compliant processing aids is mandatory to prevent contamination.
This selection process dictates the final chemical and mechanical performance of the seal. The resulting compound must maintain its physical properties while staying chemically inert during long-term exposure to fatty or aqueous food liquids.
Compounding Compliance
Post-curing the molded parts in a hot-air oven represents a common method used by processors to drive off volatile organic compounds. This thermal treatment ensures that the finished rubber articles satisfy the stringent extraction limits specified by fda 21 cfr 177.2600. Without this processing step, residual curing agents might migrate during food contact.