Meaning
cpk metrics assess the relationship between the actual spread of a process and the distance of the process mean from the nearest specification limit. In injection molding, these values indicate whether a resin grade and press configuration can consistently hold critical dimensions such as wall thickness or hole diameters. A value below 1.33 suggests that the natural variation of the process risks producing parts that exceed the allowable tolerances.
Center Deviation
Centering remains a primary concern because a process can have low variation but still produce scrap if the mean sits too close to a limit. When a molder uses cpk metrics, the calculation penalizes the result for any offset between the average part dimension and the target nominal value. This distinction separates these figures from basic capability indices that only measure total spread.
Process Stability
If a decline in cpk metrics appears over a production run, it typically signals wear in the check ring or drift in the cooling system. Monitoring these values in real time allows for the adjustment of hold pressure to maintain the required output.
Economic Impact
Procurement teams use these indices to justify the higher cost of virgin resin over regrind lots. Since regrind often introduces wider viscosity fluctuations, the resulting cpk metrics for the batch might drop, increasing the cost of inspection and the frequency of rejected parts. Every point of deviation in the capability index correlates with a predicted parts per million failure rate.
Stable materials ensure that the production line avoids the hidden costs of sorting and re-work.