Meaning
Accumulation of mineral deposits occurs on the internal surfaces of mould cooling channels. Cooling circuit scaling occurs when calcium or magnesium salts precipitate from the heat transfer fluid as it passes through the tool. This layer of scale acts as an insulator, reducing the thermal conductivity between the resin and the coolant.
Efficiency drops as the thermal barrier grows, leading to longer cycle times and increased energy costs.
Thermal Impact
Heat transfer resistance increases linearly with the thickness of the deposit. While a clean copper or steel channel allows rapid heat removal, cooling circuit scaling creates a crust that slows the solidification of the polymer. Part dimensions may drift out of tolerance because the core remains hot longer than the skin.
Stabilizing the process requires lower coolant temperatures or longer dwell times, both of which reduce machine throughput.
Maintenance Procedure
Chemical descaling agents circulate through the channels to dissolve the accumulated crust. If cooling circuit scaling is left untreated, the narrow passages within the mould may become completely blocked. Prevention involves using closed loop systems with demineralized water or adding corrosion inhibitors to the fluid.
Regular monitoring of flow rates provides an early warning before the buildup affects part quality.
Economic Consequence
Production costs rise as the cooling phase accounts for the majority of the injection moulding cycle. When cooling circuit scaling extends the cycle by even a few seconds, the total output over a large production run decreases substantially. Moulded parts may also suffer from internal stresses or warpage due to uneven cooling across the cavity.
High scrap rates and frequent downtime for cleaning directly erode the margin on high volume projects.