Meaning
Departure of an optical wave passing through a plastic lens from a perfectly spherical or planar reference surface quantifies image distortion caused by refractive index variations or surface inaccuracies. Optical testing laboratories evaluate this phase deviation using laser interferometers on precision moulded plastic optics. Measuring wavefront error pinpoints localized sink marks or internal stress gradients induced during injection moulding.
This optical error metric governs beam quality and image sharpness without dictating mechanical mounting tolerances.
Interferometric Measurement
Laser interferometers compare light transmitted through a test lens against a reference beam. Transmitted wavefront maps display peak-to-valley and root-mean-square surface departures across the clear aperture. Analyzing wavefront error allows optical molders to correct mold cavity geometry to compensate for non-uniform plastic shrinkage.
Moulding Defects
Non-uniform cooling rates and uneven packing pressure create spatial variation in polymer density across a lens cavity. Localized density changes alter local refractive indices, distorting transmitted light paths. When moulders process optical polycycloolefins at low mold temperatures, wavefront error spikes due to high residual stresses and flow marks near the gate area.
Optimizing hold pressure curves and extending pack times flattens the wavefront, yielding crisp image resolution in camera lens assemblies.
Performance Limits
Optical specifications restrict peak-to-valley wavefront distortion to fractional wavelengths of light. Lens designers specify wave error limits to guarantee target resolution across ambient temperature ranges.