Meaning
Linear and rotary feedback sensors attached to hot runner valve stems track stem displacement to provide closed-loop position control for valve-gated hot runner systems. A valve gate position encoder transmits real-time stem location data to the moulding machine controller, enabling precise multi-step opening and closing profiles. The sensor eliminates mechanical shock and pin wear associated with unmonitored pneumatic actuation.
The device operates throughout the filling and packing phases of each moulding cycle.
Velocity Profiling
Slowing stem travel right before full closure prevents mechanical valve pins from hammering into tool steel gate seats. Integrating a valve gate position encoder allows servo-driven actuators to decelerate stem motion smoothly. Controlled seating prevents gate wear and extends hot runner tool lifespan.
Fill Synchronisation
Large automotive parts require sequential valve gating to prevent weld lines by opening specific gates only when the melt front reaches them. Monitoring stem positions with a valve gate position encoder verifies that each gate opens at the exact designated time in the sequence. Accurate timing prevents cosmetic surface blemishes across long flow paths.
Position Verification
Closed-loop monitoring confirms that valve stems reach full retraction during injection and complete closure before mould opening. Utilizing a valve gate position encoder alerts machine safety systems if a stem sticks due to polymer degradation or mechanical binding. Early fault detection prevents tool damage during mould parting.