Meaning
Unsteady-state heat transport coefficients govern the rate of temperature equalization within a cooling polymer melt. Measuring transient thermal diffusivity determines how rapidly heat conducts through polymer melt relative to its volumetric heat capacity during injection mould cooling. Flash thermal diffusivity instruments send heat pulses through thin resin samples to measure temperature response over microsecond intervals.
Moulding cooling time models rely on this property to establish required cycle times for thick-walled components. Processing conditions that change polymer density or molecular alignment alter transient heat dissipation rates.
Heat Conduction
Thermal transport during injection moulding occurs under rapidly changing temperature and pressure gradients. Calculating transient thermal diffusivity accounts for simultaneous changes in thermal conductivity, density, and specific heat capacity during phase changes. Semi-crystalline polymers exhibit sudden drops in diffusivity during crystallization due to latent heat release.
Fiber fillers like carbon or glass increase directional thermal diffusivity along the flow direction, accelerating localized cooling rates.
Cycle Calculation
Coolant flow rates and tool steel selection interact with melt dissipation properties to dictate overall floor productivity. Low diffusivity values in unfilled polymers prolong core cooling, requiring extended hold times to prevent sink marks. Overestimating diffusivity leads to premature part ejection, causing core swelling, surface sink, or part distortion.
Measurement Boundary
Static laboratory diffusivity values measured at ambient pressure fail to reflect high-pressure barrel conditions. Melt compressibility under injection pressures alters transient thermal response, necessitating high-pressure diffusivity testing equipment for accurate simulation inputs.