Meaning
Preferred crystal growth of a polymer perpendicular to the surface of an embedded fiber or substrate defines a specialized solidification behavior in semi-crystalline composites. This transcrystallization occurs when the density of nucleation sites on the fiber surface is extremely high, forcing the crystals to grow outward rather than spherically. In fiber-reinforced injection moulding, this crystalline layer can significantly alter the mechanical coupling between the polymer matrix and the reinforcing fibers.
Incorrect mould temperature or processing speed can suppress this layer, leading to poor composite properties.
Nucleation Trigger
Surface energy of the reinforcement material acts as the catalyst for this oriented growth. For transcrystallization to occur, the fiber must provide highly active nucleating sites. This forces the crystal front to propagate in a columnar fashion away from the fiber.
Interfacial Bond
Mechanical connection between the polymer and the fiber is strengthened by the presence of this crystalline sheath. Transcrystallization creates a tight physical interlock that improves stress transfer from the matrix to the fibers under load. This strong bond prevents the fiber from pulling out of the matrix when the composite is subjected to tensile or bending forces.
Mechanical Consequence
Composite modulus and strength are directly influenced by the thickness of this oriented crystal layer. Excessive transcrystallization can make the interface too rigid, which sometimes reduces the impact toughness of the moulded part. Moulders must control melt and mould temperatures to manage the growth rate of this layer and balance strength with toughness.