Meaning
Chemical agents reduce the surface tension of a liquid by orienting themselves at the interface between the liquid and another phase. In polymer density testing, a surfactant is added to the immersion bath to improve the wetting of the plastic specimen. This additive prevents the formation of air bubbles on the polymer surface, which would otherwise alter the density measurement.
Only a tiny amount of this compound is needed to modify the liquid behavior, ensuring that the water flows freely into every molded surface feature.
Surface Activity
The molecular structure of these compounds contains both hydrophilic and hydrophobic regions. When dissolved in water, the surfactant molecules migrate to the surface and disrupt the cohesive forces of the water molecules. This disruption lowers the surface tension and allows the liquid to spread more easily over the plastic part.
Concentration Level
Too much additive can cause foaming or change the density of the immersion liquid. Therefore, the chemical must be used in very small, controlled quantities.
Residue Concern
Evaporation of the testing liquid can leave a dry film of the chemical on the specimen or the equipment. This residue can alter the mass of the sample or contaminate the suspension wire, which affects the accuracy of subsequent measurements. Specimen rinsing is necessary to prevent this buildup.