Meaning
Cohesive intermolecular forces at the boundary of a liquid cause its surface to behave like an elastic membrane. In polymer density testing, surface tension affects the wetting of the specimen and can prevent the liquid from completely filling small surface features. This force can hold micro-bubbles against the plastic surface, leading to incorrect mass readings.
High surface tension can also exert an extra force on the suspension wire of the balance, which affects the measurement accuracy for very light samples.
Liquid Wetting
The angle of contact between the liquid and the polymer is determined by the balance of forces. Water has a high surface tension, which makes it difficult to wet low-energy plastics.
Adhesion Force
Wetting behavior affects the forces acting on the suspension wire as it enters the liquid. This force can pull the wire downward or push it upward, adding a systematic error to the balance reading. Minimizing the wire diameter and reducing the liquid surface tension helps to reduce this error.
Corrective Agent
Chemical additions can modify the liquid properties to improve the accuracy of the immersion test. Adding a small amount of surfactant reduces the surface tension of the water, allowing it to wet the polymer completely. This treatment eliminates air bubbles and ensures that the water fills every surface crevice.