Meaning
Variations in the dimensional change of a polymer as it cools from a molten state to a solid state within a mould cavity create challenges for precision manufacturing. This shrinkage variation occurs when different areas of a part or different parts in a single run do not contract at the same rate. It is a critical factor in tool design, as the moulder must over-size the cavity to account for the expected loss of volume.
Inconsistent shrinkage leads to parts that are out of tolerance, even if the mould itself is perfectly machined.
Material Factor
Molecular structure and the presence of fillers dictate the baseline contraction rate of the resin. Crystalline polymers like polypropylene exhibit higher levels of shrinkage variation than amorphous polymers like polycarbonate because the formation of crystal structures during cooling pulls the molecules closer together. If the batch of resin contains inconsistent levels of glass fiber reinforcement, the fibers will restrict contraction in some directions but not others.
This anisotropy causes the part to shrink differently along the flow path compared to across the flow path. The orientation of the polymer chains also changes based on the injection speed and the gate location.
Processing Variable
Control of the cooling rate and the pack pressure within the cycle determines the final dimensions of the part. Shrinkage variation often stems from uneven mould temperatures, where one side of the tool is cooler than the other due to poor water channel placement. If the pack pressure is too low, the molecules are not compressed sufficiently to counteract the natural contraction of the cooling melt.
Higher melt temperatures also increase the total amount of heat that must be removed, which can lead to longer cooling times.
Geometric Result
Warpage and internal stresses appear in the finished component when different sections contract at different rates. Thick walls shrink more than thin walls because they retain heat for a longer duration, leading to sink marks or a loss of flatness. When shrinkage variation is managed correctly through uniform wall thickness and balanced gating, the part maintains its intended shape and fits correctly into the final assembly.