Meaning
Rheological behavior where the viscosity of a molten polymer changes in response to the applied shear rate rather than remaining constant governs the way plastic moves through a tool. Most thermoplastics exhibit shear thinning, which means they become easier to push as the speed of the flow increases. This non newtonian fluid flow is the reason why high injection speeds allow for the filling of thin and complex geometries.
Shear Thinning
Chains within the polymer melt align themselves in the direction of the flow to reduce internal friction. When this non newtonian fluid flow occurs, the pressure required to move the material does not rise linearly with the velocity. Molders use this property to fill large parts without exceeding the clamp force of the machine.
Velocity Profile
Friction near the cold walls of the runner causes the melt to move slowest at the edges and fastest in the center.
Mould Filling
Accurate simulation software must account for the changing viscosity at every point in the flow path. If the software assumes a constant viscosity, the predicted injection pressure will be wrong. This non newtonian fluid flow also impacts the temperature of the melt, as the friction between the moving chains generates internal heat known as shear heating.
This extra heat can sometimes lead to material degradation if the gate is too small or the injection speed is too high.