Meaning
Surface fatigue failure occurring on contact faces signifies the degradation of polymer components under cyclic compressive stress. Micro-pitting appears when localized shear forces exceed the shear strength of the resin, causing the separation of tiny material fragments from the surface layer. This phenomenon often follows the development of fine surface cracks that propagate until material displacement creates visible voids or craters.
The process creates premature component wear and degrades the functional dimensions of high precision moulded parts.
Surface Degradation
Polymer chains experience thermal and mechanical stress during the injection moulding cycle which influences their resistance to repeated load bearing. Processing variables such as inadequate cooling time or improper gate pressure lead to high internal residual stress within the part geometry. These internal stresses reduce the fatigue limit of the material compared to the datasheet values measured under static test conditions.
Frequent failure occurs in heavy duty gears or drive components where the resin reaches its limit of fatigue endurance.
Economic Consequence
Virgin resin performance expectations provide a baseline for part longevity during the design phase. Manufacturers frequently introduce regrind into the production flow to lower material costs but excessive regrind usage reduces the molecular weight distribution of the melt. This reduction directly alters the impact resistance and fatigue life of the finished product.
Parts that fail from these conditions necessitate unplanned replacement and increase the total cost of ownership for the assembly.
Material Specification
Engineering teams define the mechanical requirements for components based on anticipated cycle counts and loading profiles. Moulders hold the production parameters within tight limits to ensure the crystallinity and orientation of the resin remain consistent across the entire run. Datasheet properties show the ideal performance of a material sample, yet the actual performance depends on the specific geometry and processing history of the part.
Proper processing prevents sub-surface initiation sites from progressing into widespread structural failure.