Meaning
Physical metrics determine the viscosity of polypropylene resins by measuring the mass of material extruded through a capillary. The mfi 230c 2.16kg test provides a standardized value used to verify the grade of incoming resin.
Temperature Parameter
Heating the polymer to 230 degrees Celsius ensures that the semi-crystalline structure of polypropylene is fully melted and ready for flow analysis. Because the test for mfi 230c 2.16kg is conducted at a higher temperature than polyethylene tests, it accounts for the higher melting point and thermal stability of the propylene monomer chains. Precise control of the heating barrel is required to prevent thermal degradation from altering the results.
Failure to maintain the temperature within a narrow range leads to inconsistent data that cannot be compared across different laboratories.
Rheological Property
The rate at which the material flows under the constant weight of 2.16 kilograms reveals the average molecular weight and molecular weight distribution of the batch. A resin with a low mfi 230c 2.16kg value contains longer polymer chains that offer higher impact strength but require more force to move through a mould. These properties are essential for parts that must survive structural loads or harsh environmental conditions.
Moulding Correlation
Processing technicians rely on these values to predict how a material will behave in the gate and cavity. A batch of resin that shows a higher mfi 230c 2.16kg than previous shipments may cause the mould to overfill, leading to flash or internal stresses. This measurement helps maintain a stable process window across different material lots.