Meaning
Thermal processing ranges represent the difference between the melting point of a semi-crystalline polymer and its degradation temperature. This thermal zone, called the melt window, defines the temperature span where the resin can be safely extruded or injection moulded without burning. A wider span gives the processor more flexibility to adjust the process to fill complex mould cavities.
Process Boundary
Processors must monitor barrel temperatures to keep the polymer within its safe limits. For materials like polyethylene, a wide melt window allows stable processing even if the heater bands fluctuate slightly.
Temperature Range
Semi-crystalline and amorphous polymers exhibit different thermal behaviors during melt processing. Inside the melt window, the polymer flows as a viscous liquid that can be forced into a mould. If the temperature drops below this range, the polymer solidifies and damages the injection screw, while going above it causes the polymer to degrade and release volatile gases.
Defect Prevention
Operating outside the optimal heating zone leads to severe part defects and cosmetic issues. If the temperature drifts toward the lower limit of the melt window, the high viscosity causes injection pressure spikes and short shots. If it rises too high, the polymer chains break, resulting in splay marks on the part surface and a drastic drop in mechanical strength.
Establishing a stable cycle balances heating and cooling to keep the resin centered within this thermal zone throughout the production run.