Meaning
Enclosed production environment designed to limit the concentration of airborne particles to specific concentrations defined by international standards. Operating an iso class 7 cleanroom is a requirement for manufacturing medical devices and electronics.
Contamination Control
Medical device moulding for implantable components often takes place within this controlled space to prevent airborne debris from entering the melt stream. Particulates that land on a warm preform or inside a cavity can become embedded in the polymer and create a structural or aesthetic defect. This level of control is achieved through a combination of filtered air and strict operational protocols.
Airflow Requirement
Maintaining this standard involves at least 60 air changes every hour through high efficiency particulate air filters. These filters trap 99.97 percent of particles larger than 0.3 microns to ensure the air entering the room is consistently clean. Positive air pressure is maintained relative to the outside hallways to ensure that dust cannot leak in through the doors.
Production Protocol
Gowning procedures and restricted access are mandatory to keep the particulate levels below the specified threshold. Operators must wear hairnets and frocks to prevent the shedding of skin cells or clothing fibres into the environment. Regular monitoring with particle counters verifies that the facility remains within its specified limits during active production hours.