Meaning
Standardized testing protocols establish the general requirements and fundamental principles for thermal analysis of plastics using differential scanning calorimetry. The standard ISO 11357-1 governs the measurement of transition temperatures and enthalpies in polymers, defining terms and setting out common methodology. It provides the framework for conducting tests that determine glass transition, melting, and crystallization behavior across various thermoplastic resins.
Testing Procedure
Executing tests according to this standard requires precise calibration of the instrument’s temperature scale and heat flow signal using high-purity metal standards like indium. The procedure in ISO 11357-1 involves heating and cooling the polymer specimen at controlled rates, typically ten or twenty degrees Celsius per minute, while recording the differential heat flow. This baseline calibration ensures that measurements of crystallinity and phase transitions are comparable across different laboratories and compounding facilities.
It specifies specimen preparation techniques, recommending a sample weight of five to ten milligrams to prevent thermal gradients within the crucible.
Industrial Application
Processors utilize these standardized thermal profiles to verify the quality and consistency of incoming resin batches. Discrepancies in the melting peak or glass transition temperature compared to the material datasheet can indicate contamination or incorrect copolymer ratios. By adhering to the guidelines of ISO 11357-1, moulders can prevent processing errors such as incomplete melting or excessive warpage caused by non-uniform crystallization during cooling.
Instrumental Boundary
This standard does not prescribe the specific test parameters for every individual polymer type, as those are detailed in subsequent parts of the multi-part standard series. It focuses instead on the instrument setup, specimen preparation, and report generation that apply broadly to all thermoplastic materials. Proper implementation of this fundamental standard is a prerequisite for executing more specialized thermal tests on semi-crystalline polymers.