Meaning
Temperature-controlled fluid vessels provide a stable medium for measuring the density or thermal behavior of polymer specimens. During density testing by the displacement method, an immersion bath holds the liquid in which the plastic sample is weighed. The liquid must remain at a constant temperature because its density varies with thermal changes.
This liquid must also be chemically inert to the polymer being tested to prevent swelling or dissolution, and it must be deep enough to allow complete submersion without the sample touching the walls.
Liquid Medium
Selecting the appropriate fluid is essential to ensure that the specimen is wetted completely without chemical reaction. Distilled water is the most common medium for immersion bath testing of polymers denser than water. For lighter polymers like polyethylene, ethanol or silicon oil is used to ensure the sample sinks or is correctly suspended.
Temperature Variation
Small changes in the fluid temperature alter the density of the immersion bath and skew results. Precise thermostats must keep the fluid temperature within a fraction of a degree.
Measurement Error
Physical disruptions in the liquid can cause incorrect mass readings on the connected balance. Convection currents within the immersion bath can exert a force on the suspended sample holder, which changes the apparent weight. Minimizing these currents requires careful insulation of the vessel and disabling any active stirring mechanisms during the actual weighing.