Meaning
Mixing elements in twin-screw extruders provide the mechanical energy required for dispersive compounding of polymers and additives. High-shear kneading blocks are specialized screw segments configured with staggered disks that force the material through narrow gaps. They generate intense shear stresses to break down agglomerates of pigments or fillers.
This action occurs within a localized zone of the extruder barrel to prevent excessive thermal degradation of the polymer matrix. The configuration of these blocks determines the balance between distributive and dispersive mixing.
Stagger Angle
The orientation of the individual disks on the shaft controls the forwarding action and the residence time. Stagger angles of forty-five degrees forward the material while applying moderate shear. When high-shear kneading blocks are aligned at ninety degrees, they exert maximum shear with no forward pumping action.
This setup requires the upstream pressure to push the melt through the mixing zone.
Energy Dissipation
Mechanical energy supplied by the motor is converted into heat within the polymer melt through viscous dissipation. This temperature rise must be monitored to avoid polymer degradation or loss of additive efficiency. Adjusting the screw speed or the throughput rate manages the heat generation.
Cooling zones along the barrel help remove excess thermal energy.
Degradation Control
Polymer chains are susceptible to mechanical scission when exposed to excessive shear forces. Incorporating high-shear kneading blocks requires careful consideration of the melt viscosity and residence time. High viscosity resins generate more heat, which can lead to localized degradation.