Meaning
Phase offset between fundamental and harmonic signal frequencies during high frequency ultrasonic transducer excitation defines group delay in polymer non-destructive testing. This timing metric quantifies signal propagation velocity shifts through heterogeneous composite plaques and multi-layer laminate structures. Extrusion and injection moulding operations monitor this delay parameter to detect internal voids, delamination zones, and density gradients across finished components.
The measurement stops applying once the acoustic wave fully traverses the sample thickness and reaches the receiving transducer array.
Thermal Variation
Crystallinity fluctuations induced by uneven cooling rates alter ultrasonic transit times across thick-walled injection moulded parts. Barrel temperature instability during plastication changes local melt density, which directly impacts the baseline propagation velocity of high frequency pulses. Moulders establish a strict processing window to hold this delay metric within acceptable tolerances across production runs.
Material specifications dictate the nominal acoustic property limits, whereas part specifications account for geometry-induced variations in the final moulded article.
Regrind Degradation
Incorporating recycled polymer fractions into virgin resin streams shifts molecular chain length distribution and modifies acoustic attenuation coefficients. Thermal history accumulated during prior processing cycles alters the viscoelastic response of the material matrix. Production lines tracking the propagation delay parameter identify excessive regrind ratios before mechanical strength testing fails.
Virgin polymer economics rely on predictable acoustic baselines, whereas high regrind percentages introduce unpredictable phase shifts that complicate automated ultrasonic inspection.
Tooling Calibration
Transducer coupling pressure and surface finish variations across mould cavities introduce systematic errors into baseline delay measurements. Automated sorting equipment compensates for these fixture-induced discrepancies through reference block calibration before production batches enter the testing station. Part shrinkage during cooling changes the physical path length, requiring continuous algorithmic adjustments to isolate actual material anomalies from dimensional drift.
Proper sensor alignment ensures that the recorded signal shift corresponds strictly to internal structural defects rather than transducer displacement.