Meaning
Specific regulatory provision within the plastic implementation measure governs the assessment of substances not included in the union list of authorized monomers and additives. Manufacturers applying eu 10/2011 article 19 must perform a risk assessment of non-intentionally added substances that appear in the polymer as impurities or reaction byproducts. This requirement ensures that every chemical present in a food contact material is safe regardless of its listing status.
Risk Protocol
Safety evaluations are conducted by the producer using recognized scientific principles of risk assessment. Under eu 10/2011 article 19, the moulder or material supplier investigates the toxicological profile of any substance found in the finished part.
Impurity Presence
Chemical species such as breakdown products of pigments or oligomers from the resin backbone are common targets of this screening process. Analytical laboratories use high resolution mass spectrometry to identify unknown peaks that emerge during migration testing under eu 13130 guidelines. If a substance lacks a specific migration limit, the assessor applies a threshold of toxicological concern to determine if the exposure levels are acceptable.
Failure to account for these residues can lead to legal non-compliance even if the raw materials are all approved.
Safety Verification
Final validation of a food contact part depends on a complete dossier that includes the results of the article 19 assessment. The documentation provides the evidence needed to sign the declaration of compliance for the downstream customer.