Meaning
Chemical equilibrium displacement using thermal volatilisation removes diol byproducts from condensation polymers during high-viscosity polycondensation and post-condensation processing. The rate of ethylene glycol stripping determines the shift toward higher average chain lengths in polyethylene terephthalate synthesis. It operates within high-vacuum finishing reactors and solid-state polycondensation vessels to strip free diols from terminal ester linkages.
The mechanism stops governing polymerisation kinetics when melt temperature causes chain scission rates to outpace chain coupling.
Polycondensation Mechanism
Transesterification produces an unstable balance between chain building and hydrolytic chain splitting. Vacuum extraction during ethylene glycol stripping pulls volatile diol fractions out of the viscous liquid melt. Bubbles form and rupture along continuous dynamic films generated by rotating agitation blades.
Molecular weight climbs in direct proportion to the mass removal velocity of the diol byproduct.
Viscosity Control
Melt flow rates drop predictably as volatile diols evacuate the reacting matrix. Incomplete ethylene glycol stripping leaves short chains and excess hydroxyl end groups, yielding resin with an intrinsic viscosity below technical specifications for blow moulding preforms. Attempting to convert such sub-spec material produces barrel drool, thin preform walls and catastrophic stress cracking under carbonation pressure.
Maintaining high vacuum levels during stripping prevents volatile retention in virgin pellet production.
Thermal Limitation
Prolonged residence at severe vacuum and temperatures exceeding two hundred and eighty degrees Celsius induces thermal ester pyrolysis. Thermal breakdown produces acetaldehyde, cyclic oligomers and vinyl ester end groups rather than continuous chain growth. These degradation pathways consume available hydroxyls and render further stripping ineffective.
The process requires tight balancing of residence dwell against vacuum depth to avoid discolouration and loss of mechanical toughness.