Meaning
Thermal thresholds define the maximum mold cavity surface temperature at which a solidified plastic part can be mechanically removed without permanent deformation. Setting the ejection temperature determines the cooling phase duration within the injection moulding cycle. This process variable governs dimensional stability, cycle time and part ejection stress for thermoplastic materials.
The threshold applies strictly to the cooling phase of the moulding cycle and loses relevance once the part clears the mold parting line.
Thermal Requirement
Molded parts must reach sufficient flexural modulus inside the cavity to withstand mechanical ejector pin forces without pin push-through or surface stress whitening. Polymers with high heat deflection temperatures permit higher ejection temperature settings, reducing required dwell time in the tool. When cooling times are truncated prematurely, soft plastic core sections distort under mechanical ejection forces.
Excessively low settings extend cycle times unnecessarily, increasing manufacturing costs without yielding dimensional benefits. High mold wall temperature variations produce uneven shrinkage forces across thin sidewalls, leading to warped geometries after release.
Cycle Control
Thermocouple sensors embedded near cavity surfaces track real-time tool cooling performance across production runs. Molders adjust cooling water flow rates and coolant temperatures to maintain stable ejection temperature values during continuous operation.
Defect Boundary
Exceeding the maximum ejection temperature for a given polymer grade causes post-mould warping and pin marks on cosmetic surfaces.