Meaning
Surface taper applied to mold sidewalls enables clean component ejection from the cavity during the demolding stage of injection molding. Internal light paths near peripheral wall sections generate draft angle reflections when nominal wall slopes redirect internal rays away from designed target vectors. Optical part designers specify wall angles that prevent mechanical binding during ejection while holding parasitic reflections within acceptable photometric limits.
Sidewall Slope
Taper angle variations alter the angle of incidence for internal light rays striking polished cavity walls. When processing transparent resins like polycarbonate, draft angle reflections redirect boundary rays into adjacent optical channels or outer housings. Increasing the wall taper simplifies part removal from the mold cavity, yet larger angles shift internal reflection geometry farther from perpendicular nominal surfaces.
Processing Shift
Volumetric shrinkage shifts internal wall positions relative to theoretical CAD models during cooling. When resin shrinkage varies due to packing pressure fluctuations, sidewall angles change slightly across production runs. Molders monitoring optical performance must hold cavity pressure constant to keep draft angle reflections within nominal deviation windows.
Specification Limit
Datasheet values for resin refractive index assume isotropic bulk properties without localized wall slope distortion. Stray light testing isolates reflection artifacts caused by ejection draft from internal material voids or surface roughness.