Meaning
Mechanical forces generated at the interface between a cooling polymer and the tool wall determine the ease of part removal. Demolding shear stress quantifies the resistance that must be overcome by the ejection system. High stress levels can lead to part deformation or stress whitening.
Friction Factor
Friction factor accounts for the interaction between the shrinking resin and the textured or polished mould surface. As a part cools, it contracts onto cores, which increases the demolding shear stress considerably. Internal ribs and bosses are particularly susceptible to this clamping effect.
Draft angles are designed specifically to reduce this resistance by allowing the surfaces to separate immediately.
Ejection Damage
Ejection damage occurs when the force required for removal exceeds the structural integrity of the plastic at the ejection temperature. If the demolding shear stress is too high, the pins may punch through the part or leave visible indentations. Tool coatings or internal lubricants are often used to lower this friction.
Moulders must monitor these forces to prevent premature wear on the moving components of the tool.
Lubrication Efficacy
Lubrication efficacy relates to the performance of surface-active agents in reducing the drag during ejection. When external release agents are applied, they create a temporary barrier that lowers the demolding shear stress for a limited number of cycles. Permanent coatings like nickel-PTFE provide a more durable solution for high-volume production.
This approach reduces the maintenance downtime associated with manual spraying.