Meaning
The specific temperature at which a polymer melt releases the maximum amount of latent heat during cooling defines a key material characteristic on a differential scanning calorimetry curve. Moulders use the crystallization peak temperature to determine the window of time required for the resin to solidify. A higher value usually means the material crystallizes rapidly, shortening the cooling portion of the injection moulding run.
Thermal Measure
Dynamic cooling experiments at constant rates reveal this value. The crystallization peak temperature depends heavily on the presence of nucleating agents in the resin. These agents provide sites for crystal growth, causing the transition to start sooner.
Moulders track this value to compare virgin resins against recycled polymer batches.
Cycle Consequence
If the crystallization peak temperature is too low, the polymer remains soft and tacky for a longer period within the tool. This delay forces the operator to extend the cure time to prevent part distortion during ejection. In semi-crystalline polymers like polyamides, premature ejection damages the mechanical properties of the finished product.
Proper monitoring of thermal transitions prevents such productivity losses.
Transition Limit
Processing conditions like shear rate and cooling speed modify the actual temperature of crystallization. Under rapid injection conditions, molecular alignment raises the transition temperature.