Meaning
Mathematical transformation arrays convert raw multi-axis electrical outputs from moulding machine transducers into aligned force and pressure values. A calibration matrix corrects for cross-talk and non-linearities across multiple sensing elements in the mould cavity. It is applicable to multi-cavity hot-runner moulds where individual sensor positions experience varied thermal expansion.
Sensor Integration
Simultaneous measurement of shear force and normal force requires decoupled electrical signals. The calibration matrix resolves these forces by applying pre-calculated coefficients to the voltage outputs of the load cells. In a dual-axis cavity pressure sensor, this mathematical correction prevents the high clamping force from artificially inflating the recorded melt flow pressure, allowing the operator to monitor the actual polymer viscosity during the gate freeze-off phase.
Process Consistency
Mould-to-mould transferability depends on these calibrated values remaining identical across different production lines. If the calibration matrix is not updated during tool maintenance, the machine controllers will apply incorrect injection velocity profiles. This mismatch leads to short shots on one machine and flash on another, despite both running the same program.
Quality Audit
Part certification requires traceable transducer data during the entire manufacturing run. An inaccurate matrix invalidates the injection curves stored in the quality database, making it impossible to verify compliance with dimensional tolerances. This traceability ensures that every moulded part meets the structural requirements of the customer.