Meaning
A transition protocol manages the displacement of molten resin within an injection mould cavity by adjusting injection speed at a predetermined position. Volumetric switchover occurs when a controller detects that the screw has reached a specific distance from the nozzle, triggering a move from velocity-based filling to pressure-based packing. This sequence prevents over-packing of the cavity or short shots by terminating the high-speed phase exactly when the melt reaches the required volume.
Flow Control
Precision moulding relies on this trigger to maintain consistent part dimensions despite small variations in raw material viscosity. Virgin resin typically displays stable flow characteristics, but the introduction of regrind alters the melt index and forces an adjustment to the set point. A moulder compensates for these shifts by shifting the transition distance to ensure the cavity remains full without flashing.
Discrepancies between the programmed switchover position and the actual displacement of the melt create internal stress or inconsistent part weight across a production run.
Defect Mitigation
Improper setting of the transition point leads to structural failure or surface imperfections such as sink marks and burn spots. Short shots develop when the machine stops filling before the resin reaches the extremities of the tool because the trigger was set too early. Conversely, excessive material forces into the tool when the switchover occurs too late, resulting in damaged tooling or heavy flash.
Operators observe the cushion to verify that the system maintains a consistent residue of material after each stroke.
Process Verification
Datasheets provide typical processing windows for a resin grade, yet the optimal switchover point remains a variable specific to each individual mould configuration. Tool geometry and runner layout dictate the required volume, while the machine control unit captures the exact screw position for each cycle. Stability in this variable ensures that the packing phase effectively compensates for material contraction during cooling.
Reproducible switchover accuracy provides the foundation for stable injection moulding outputs.