Meaning
Physical constants that quantify the change in volume per degree of temperature change provide the basis for calculating mould shrinkage and warpage. The volumetric expansion coefficient is a basic property found on resin datasheets to guide tool design. It accounts for the three-dimensional growth or contraction of the polymer as it undergoes thermal cycling.
Design Calculation
Design calculation using this coefficient allows engineers to size the mould cavity larger than the intended final part. Because polymers contract considerably as they transition from a melt to a solid, the volumetric expansion coefficient determines the compensation required. Crystalline materials like nylon exhibit a much higher rate of change than amorphous materials like polycarbonate.
This dictates the resin choice.
Process Impact
Process impact is seen in the relationship between packing pressure and the final part density. Higher packing pressures compensate for the contraction predicted by the volumetric expansion coefficient by forcing more material into the cavity. If the pressure is insufficient, the part will develop sink marks or internal voids.
Moulders must balance these settings to ensure the part reaches the correct dimensions once it reaches room temperature.
Tolerance Specification
Tolerance specification defines the acceptable range of dimensional variation for the finished part. Because the volumetric expansion coefficient is temperature-sensitive, the environmental conditions during the measurement must be controlled. Parts measured immediately after moulding will differ from those measured after 24 hours of stabilization.
This waiting period is standard practice in high-precision polymer manufacturing.