Meaning
Correlation between thermal energy and polymer property variation describes how the mechanical and rheological characteristics of a material alter with thermal changes. This temperature dependence dictates how a polymer responds to heating and cooling cycles during melt processing. It determines the rate of solidification and the onset of crystallisation.
The boundary of this dependence is marked by the thermal degradation temperature at the high end, and the glass transition temperature at the low end.
Viscosity Variation
Molten polymer viscosity decreases exponentially as temperature rises because increased thermal energy increases free volume and molecular mobility. In injection moulding, the temperature dependence of melt viscosity is often modeled using the Arrhenius or the Williams-Landel-Ferry equations. A highly temperature-sensitive resin requires tight control of the barrel heaters to prevent variations in flow behavior.
Density Change
Volumetric shrinkage occurs as the polymer cools from the melt to a solid state. This density change is highly non-linear, especially for semi-crystalline polymers that undergo rapid crystallisation.
Processing Window
Establishing the correct range of operating temperatures prevents both material degradation and high injection pressures. Within the processing window, the polymer must remain fluid enough to fill the cavity easily without undergoing thermal degradation. If the temperature dependence of the polymer is too high, small fluctuations in tool temperature can lead to inconsistencies in part dimensions and weight.
This sensitivity requires the use of stable, closed-loop cooling circuits in the tooling.