Meaning
Additive manufacturing technology utilizes a focused high-energy laser beam to fully fuse thin layers of metallic powders into dense three-dimensional components. Computer-aided designs guide the laser across a powder bed, melting metallic particles along micro-scale cross sections under an inert argon or nitrogen atmosphere. Successive layer deposition builds intricate geometries that cannot be produced via conventional subtractive CNC machining or casting methods.
The process stops producing dense components if improper energy density inputs cause keyhole porosity, un-melted powder defects or excessive residual thermal stress.
Conformal Cooling
Injection mould inserts manufactured using selective laser melting incorporate conformal cooling channels that closely trace complex cavity contours. Traditional straight-drilled cooling lines leave hot spots in deep core areas, leading to prolonged cycle times and uneven part shrinkage. Conformal fluid passages optimize heat extraction efficiency, shortening cycle times by up to thirty percent on dense automotive parts.
Differential cooling warpage in semi-crystalline polymers like polyamides drops sharply when mould surface temperatures remain uniform. Toolmakers leverage this additive method to eliminate sink marks on cosmetically sensitive plastic surfaces.
Residual Strains
Intense localized thermal gradients during laser exposure introduce high tensile residual stresses into the printed metal matrix. Without immediate stress relief heat treatment, printed tool inserts warp severely upon removal from the base build plate. Unchecked internal stresses provoke micro-cracking across thin-walled sections, especially in high-hardness tool steels like 1.2709.
Stress-relieved inserts must undergo final finish milling or electrical discharge machining on mating faces to satisfy micron-level tooling tolerances. Heat treatment transforms the as-printed microstructure into a robust tool steel matrix capable of resisting high injection pressures.
Surface Finishing
Porous surface finishes inherent to powder fusion present significant ejection challenges if left in an as-built condition inside moulding cavities. Raw printed surfaces display surface roughness values that mechanically lock moulded plastic, preventing clean part ejection. Moulders must polish, micro-bead blast or chemically mill all cavity-facing walls before running production.
Virgin polymers stick tenaciously to raw additive surfaces, causing part tearing and heavy gate residue. Proper surface post-processing ensures additively manufactured tooling delivers identical polish and wear performance compared to wrought cavity steel.