Meaning
The rotational force acting on a slender ejector or valve pin when it is subjected to asymmetrical melt flow or high cavity pressures represents a primary mechanical load in injection moulding. Measuring or calculating the pin bending moment is necessary to prevent premature steel fatigue and misalignment during the moulding cycle. This action occurs most frequently when the incoming polymer stream enters the cavity at an angle and exerts a lateral drag force on the pin.
If the load exceeds the yield strength of the tool steel, the pin will permanently deform.
Force Origin
High-speed injection of highly viscous polymers or glass-filled resins produces a powerful lateral sweep as the melt front passes an unsupported pin. This sweep generates a transient pin bending moment that peaks just before the cavity is completely filled. In multi-gate systems, unbalanced filling from different directions can apply opposing lateral forces that push the pin off-center.
The lateral loading is compounded by high holding pressures, which wedge the solidified polymer skin against the pin shaft. Such stresses can cause micro-cracks to develop in the steel, leading to sudden pin fracture during production.
Defect Consequences
When a pin bends, it wears out the surrounding steel insert on one side, which leads to a widening of the clearance gap. This clearance allows molten plastic to enter the ejector bore and form flash, which jams the ejection mechanism. A bent valve pin also fails to seat correctly in the gate orifice, resulting in an uneven gate vestige or a severe mark on the part.
This damage leads to costly downtime and requires manual replacement of the pins.
Structural Remediation
Mould designers minimize the pin bending moment by reducing the unsupported length of the pin or by adding guide bushings. Another approach involves modifying the gate location to distribute the flow symmetrically. Technicians can also choose high-tensile tool steels to increase stiffness.