Meaning
Electrostatic signal generation in a piezoelectric cavity pressure sensor provides a measure of the mechanical force applied by the polymer melt to the sensor head. This signal, expressed as picocoulomb charge output, is directly proportional to the compression of the quartz crystal under pressure. Highly sensitive sensors yield a greater charge for a given pressure, improving the signal-to-noise ratio in small-mould applications.
The output is bounded by the piezoelectric constant of the crystal cut and the surface area of the sensor diaphragm.
Amplification Conversion
Low signal levels require short, highly insulated cables to prevent electrical noise from masking the data. The charge amplifier converts the picocoulomb charge output into a standard voltage or current signal for the machine controller. If the cable connection has even tiny amounts of moisture, the charge leaks away before conversion.
This loss ruins the calibration and leads to false pressure readings.
Process Monitoring
Accurate conversion of this tiny charge allows the controller to trace the precise filling pattern of the mold cavity. When the picocoulomb charge output is monitored correctly, the system detects slight viscosity changes in the melt. This detection enables automatic sorting of parts with weight variations.
Calibration Standards
Manufacturers specify the sensor sensitivity in picocoulombs per bar of pressure. Technicians enter this specific value into the amplifier software during setup. Routine verification ensures that the sensor maintains this sensitivity across millions of injection cycles.