Meaning
Geometric deviation that occurs when the actual shape of a gear tooth face varies from the intended mathematical curve. Every involute profile error impacts the smoothness of the power transmission and the noise level of the gear set. It is measured as the distance between the theoretical involute and the actual scanned profile of the tooth.
Thermal Influence
Non uniform cooling in the tool causes the plastic to shrink unevenly across the thickness of the tooth. This differential shrinkage pulls the material away from the intended shape, creating a bowed or flattened profile. A high crystalline resin like acetal is more prone to these errors than an amorphous resin like polycarbonate.
This effect is compounded when the cooling lines in the tool are positioned inconsistently relative to the tooth geometry.
Functional Damage
Deviation in the profile leads to a non constant velocity between the driving and the driven gear. This fluctuation causes vibration and premature wear on the tooth surfaces. In high speed applications, even a small involute profile error generates audible noise and reduces the life of the assembly.
Compensation Method
Correcting the error involves adjusting the steel of the mould to account for the predicted shrinkage. Engineers use simulation software to anticipate how the resin will contract. If the error persists, the moulder might change the pack pressure or the cooling time to stabilise the shape.