Meaning
Signal processing calculations in white light interferometry evaluate the modulation amplitude curve of overlapping light waves across scan height. Optical surface profilometry of polymer films and injection-molded lenses uses the fringe envelope to identify the exact vertical position of maximum interference contrast. Modulated light fringes reach peak visibility at zero path difference between reference and sample beams.
Locating this signal peak allows non-contact profilers to map surface roughness on transparent and semi-transparent plastic substrates.
Peak Detection
Mathematical algorithms fit polynomial or Gaussian curves to intensity data sampled along the Z-axis scanner path. Local surface reflectivity variations shift the peak position of low-coherence light signals. High roughness on textured plastic parts scatters incident light, broadening the signal modulation curve.
Accurate peak location algorithms isolate real surface height from optical reflections inside transparent polymer coatings.
Measurement Range
Short coherence length light sources restrict interference visibility to a narrow vertical scanning range. Broad spectrum light emitting diodes yield tight signal envelopes that prevent fringe ambiguity over steep surface steps. Thin polymer films create secondary signal envelopes from back-surface reflections that can distort top-surface height extraction.
Filtering algorithms separate front-surface reflections from internal interface signals.
Substrate Interference
Transparent resins produce multiple signal peaks when light reflects from subsurface density shifts or internal voids. Dual reflections distort the primary modulation curve, shifting calculated surface heights. Thin optical films require specialized signal algorithms to decouple surface topography from film thickness variations.
Profilometer software isolates valid surface signals by setting contrast threshold limits.