Meaning
Fluctuations in the efficiency of ion production during mass spectrometry analysis describe the changes in signal strength caused by the mobile phase or sample matrix. This electrospray ionization variance occurs when the spray needle voltage or the flow rate of the solvent deviates from the set point. They affect the ability of the instrument to accurately measure the concentration of polymer additives in a sample.
The phenomenon is confined to the ionization source of the mass spectrometer.
Ionization Efficiency
Molecular structure and solvent chemistry dictate how easily a substance gains or loses a charge. Within the context of electrospray ionization variance, certain additives may be suppressed by the presence of more easily ionized contaminants. This suppression leads to a lower signal than the actual concentration would suggest.
Adding a known internal standard helps to compensate for these differences. Analysts often adjust the capillary voltage and the desolvation temperature to find the most stable conditions for a specific polymer extract. The choice of solvent can either help or hinder the formation of the charged droplets.
Signal Stability
Maintaining a constant stream of ions is necessary for reproducible results. When electrospray ionization variance is high, the baseline of the chromatogram becomes noisy and difficult to interpret. This instability often stems from a dirty spray capillary or an unstable gas flow.
Regular maintenance of the ion source reduces the frequency of these fluctuations.
Quantification Accuracy
Correct measurement of trace components depends on the repeatability of the ionization process. If electrospray ionization variance is not controlled, the reported concentration of a plasticizer might be incorrect by a large margin. This error can lead to a false pass in a compliance test.
Calibration curves must be run frequently to ensure the detector response is linear.