Meaning
Intermolecular dehydration of beta-hydroxyethyl ester end groups or unreacted ethylene glycol during polyester polycondensation yields an ether diol byproduct that integrates directly into the macromolecular chain backbone. Diethylene glycol formation alters the chemical architecture of polyethylene terephthalate by replacing rigid ester segments with flexible aliphatic ether linkages. This side reaction governs the melting temperature depression, thermal oxidative stability and barrier characteristics of polyester resins.
The phenomenon is confined to condensation polymerization chemistry containing glycol end groups, ceasing entirely once polyester resin solidifies into finished articles where covalent ether formation terminates.
Chemical Kinetics
Acid-catalysed etherification proceeds alongside desired transesterification, driven by high process temperatures and acidic reaction environments. Carboxyl end groups act as internal catalysts, accelerating diethylene glycol formation when terephthalic acid esterification runs unbuffered. The resulting diol functions as an unintended co-monomer, copolymerizing covalently into the polyester backbone.
Basic additives such as sodium acetate or tetraalkylammonium hydroxides suppress this side reaction by neutralizing trace catalytic acidity. High residence time in the melt phase escalates ether incorporation rates, skewing chain symmetry.
Property Disruption
Integration of flexible ether groups impairs the crystallizability of the finished resin, reducing the peak melting temperature by roughly two to three degrees Celsius for every weight percent formed. This structural softening broadens the processing window for stretch blow moulding, reducing preform hazing by retarding crystallization kinetics during cooling. Excessive diethylene glycol formation lowers the glass transition temperature, weakening creep resistance under pressure and elevating gas permeability across container walls.
Thermal stability degrades substantially, leading to severe yellowing and ester scission when the polymer undergoes secondary remelting during extrusion or injection moulding.
Sourcing Specification
Resin procurement sheets specify maximum diethylene glycol content, typically demanding values below one point five weight percent for carbonated soft drink bottles to maintain carbon dioxide retention. Thermoforming sheet grades tolerate higher concentrations, leveraging the reduced crystallinity to improve thermoforming clarity and lower cycle times. Post-consumer bottle flakes frequently exhibit elevated ether levels from cumulative thermal reprocessing, forcing compounders to monitor drop-offs in heat deflection temperatures.
Regrind containing unchecked ether concentrations cannot maintain the structural stiffness required for hot-fill container applications. Material verification relies on gas chromatography or proton nuclear magnetic resonance following alkaline hydrolysis of the polymer sample. Diethylene glycol formation establishes the ultimate limit on thermal performance and barrier integrity in technical polyester grades.