Meaning
Geometrical relationship between the length of the parallel exit section of a die and the thickness of the opening. Die land ratio influences the amount of time the polymer melt spends under constant pressure before emerging into the atmosphere. This parameter is calculated by dividing the land length by the gap height.
Swell Control
Elastic energy stored in the polymer chain during the compression phase is released as the material exits the tool. A high die land ratio provides more time for the molecular chains to relax, which significantly reduces the phenomenon of extrudate swell. Reducing this swell is necessary for maintaining the precise dimensions of complex profiles or thin-walled tubes.
Surface Quality
Resistance to melt fracture improves when the transition through the exit zone is controlled. When the die land ratio is too low, the sudden pressure drop at the exit can cause surface irregularities known as sharkskin. Increasing the land length helps to stabilize the flow but also raises the total backpressure on the extruder motor.
Processing Window
Optimization of the tool design depends on the specific viscosity and shear sensitivity of the resin. A material with high molecular weight usually requires a larger die land ratio to achieve a smooth finish at commercial line speeds. If the ratio is mismatched to the resin, the processor faces a narrow window where only very slow speeds yield acceptable parts.
This restriction limits the economic viability of the production run by capping the maximum output of the extrusion line.