Meaning
Automated control sequences adjust process parameters based on real-time sensor feedback to maintain a specified set point. This logic ensures that the actual output matches the target value by continuously monitoring variables such as cavity pressure or melt temperature. Implementing a closed loop algorithm allows the machine controller to compensate for viscosity changes or ambient temperature shifts within a single cycle.
It defines the boundary where passive monitoring ends and active correction begins.
Process Stability
Maintaining a steady state requires high frequency data acquisition from the tool or barrel. Small variations in resin moisture or regrind ratios are countered by the closed loop algorithm through adjustments in screw speed or hold pressure. Consistent part weight results from this tight regulation.
Automation removes the need for manual intervention when the oil temperature in a hydraulic press rises over several hours of operation. High precision sensors detect these shifts before they impact the final dimensions of the part.
Correction Mechanism
Hardware sensors provide the input signal needed for the processor to calculate the error. If the sensed pressure falls below the set point, the closed loop algorithm triggers an immediate increase in hydraulic force. This happens in milliseconds.
Tolerance Bound
Precise limits define the range within which the system operates. When a closed loop algorithm cannot pull the process back to center, it triggers an alarm. This prevents the production of sub-optimal parts.