Meaning
Quality control protocols established to verify that incoming materials or newly fabricated injection moulds comply with predefined engineering specifications. This evaluation is done before final sign-off. Implementing structured acceptance testing prevents costly production interruptions and reduces the risk of generating defective moulded parts.
The protocol specifies the tolerance limits and the required sample sizes for a representative assessment. It establishes a clear threshold where the buyer can reject a batch or a tool.
Operational Evaluation
Verification of dimensional accuracy occurs during the initial dry runs of the tooling. Tooling trials that run under nominal process parameters reveal any misalignment or cooling line issues. This phase also checks the ejector system operation.
Poor thermal control in the mould leads to warped parts and prolonged cycle times.
Material Verification
Incoming polymer shipments undergo laboratory checks to ensure the resin matches the ordered technical datasheet. Tests measure properties like melt flow index, moisture content, and density before any material is loaded into the production hoppers. Discrepancies in these baseline properties can cause issues during the moulding process.
Using out-of-specification material leads to inconsistent part weight and mechanical failure.
Financial Consequence
Failing to conduct these initial checks results in high scrap rates and wasted machine time. Correcting mould defects after production begins is far more expensive than identifying them during the initial trials.