Meaning
Reduction in the light gathering capacity of an optical system occurs when the slope of a surface reflects rays outside the collection cone of the objective. This phenomenon, known as numerical aperture attenuation, leads to dark spots or missing data in topographical maps of steep or textured polymer parts. The effect is particularly pronounced when measuring high gloss surfaces with significant curvature.
Signal Loss
Light that strikes a surface at an angle greater than the acceptance angle of the lens is lost to the sensor. In the context of numerical aperture attenuation, the system fails to record the height of certain pixels.
Angle Limitation
High magnification objectives have a larger numerical aperture and can capture steeper slopes. However, numerical aperture attenuation still limits the inspection of sharp corners or deep textures in moulded components. Users must often tilt the part or use multiple scan angles to overcome this physics based barrier.
Measurement Fidelity
Accuracy of the surface roughness calculation depends on receiving a return signal from every point in the field of view. When numerical aperture attenuation removes data, the software may interpolate the missing sections, leading to potential errors. Selecting the correct objective for the specific resin finish and part shape is necessary for reliable metrology.
Missing data points can lead to an underestimation of the true surface roughness.