Meaning
Forced-feeding auxiliary machinery designed for low-bulk-density polymer scrap maintains positive pressure against extruder screw flights when gravitational feed fails. A crammer class III installation provides the highest torque bracket and largest compression ratio among standard auger feed assemblies, moving ultra-light edge trim, regrind flake, and blown film fluff directly into the feed section. The specification governs motor output, screw flight depth, and throat venting geometry for materials exhibiting bulk densities below one hundred grams per liter.
Its operational scope ends at free-flowing granular resin or densified pellets, where forced compaction causes feed throat bridging or motor overcurrent.
Auger Geometry
Conical root profiles and decreasing flight pitches compress cellular and fibrous scrap mechanically as material advances downward. A crammer class III feeder utilizes dual counter-rotating screws or a steep-pitch vertical auger that narrows toward the barrel interface, forcing air out through backward venting ports before melt initiation. Scrap volume shrinks by up to five times within the auger casing.
This mechanical densification prevents polymer fluff from floating above the extruder throat, eliminating starving conditions that cause melt pressure instability.
Torque Demand
Continuous drive power must overcome physical interlocking between shredder flake flakes without causing premature frictional melting inside the hopper throat. In a crammer class III drive system, high-reduction gearboxes deliver continuous torque across low rotational speeds, monitored through drive inverter amperage. Frictional preheating softening the polymer must remain below the resin glass transition temperature to prevent agglomeration on the auger shaft.
Throughput Stability
Extruder output under gravity feed drops significantly when light regrind replaces virgin pellets, while mechanical feeding recovers rated line capacity. A crammer class III unit stabilizes barrel fill factors, keeping downstream melt pressure within narrow limits and preventing parison surge or profile dimension drift. Virgin resin runs smoothly without mechanical assistance, making the crammer class III assembly an investment justified specifically by the recovery economics of low-bulk-density regrind streams.