Meaning
Chemical process or engineering control implemented to lower the concentration of chlorinated aromatic hydrocarbons in a polymer stream. Industrial recycling of PVC or contaminated post-consumer resins often requires chlorobenzene reduction to meet environmental safety standards. The process removes residual solvents that could otherwise leach from the finished part during its service life.
Solvent Stripping
Thermal stripping or solvent washing stages are employed to isolate the unwanted chemical species. In a typical recovery system, chlorobenzene reduction is achieved by applying heat under a vacuum to pull the volatile components away from the solid resin. The efficiency of this step dictates the final purity level and the suitability of the material for food-contact applications.
Purity Compliance
Material safety datasheets must reflect the absence or minimal presence of these compounds to comply with safety frameworks. Monitoring for chlorobenzene reduction ensures that the manufacturing facility avoids the legal risks associated with hazardous emissions. Testing laboratories use gas chromatography to verify that the levels stay below the parts-per-million threshold defined by the specification.
Backbone Protection
Prolonged exposure to high temperatures during the stripping phase can cause thermal degradation of the polymer backbone. If the chlorobenzene reduction step is not carefully controlled, the resin loses its mechanical strength and yellowing occurs. Balancing the residence time in the reactor against the removal efficiency prevents the loss of physical properties in the recycled plastic.
Successful execution results in a material that behaves like virgin resin while maintaining a lower environmental footprint.