Meaning
Internal release agents for thermoplastic processing reduce melt viscosity and prevent polymer adhesion to hot metal tooling surfaces. A calcium stearate lubricant acts as both an acid scavenger and an external lubricant in polyvinyl chloride and polyolefin formulations. Excessive amounts can cause screw slippage, leading to reduced throughput during extrusion.
Extruders run more efficiently when the additive prevents sticking in the feed throat.
Processing Impact
Torque reduction in the extruder occurs when the additive reduces friction at the polymer interface. This calcium stearate lubricant lowers the pressure at the die while maintaining a stable output rate. Poor control of this level leads to surging.
When the feed zone temperatures are too high, the additive melts prematurely.
Thermal Stability
Degradation during high temperature molding is mitigated by the scavenging effect of the stearate on acidic catalyst residues. A calcium stearate lubricant neutralizes hydrochloric acid in chlorinated polymers to prevent discoloration. Without this action, the polymer turns yellow or brown during reprocessing.
Dispersion Limit
Aggregation of poorly dispersed additive particles creates cosmetic flaws and physical weak points in the molded part. Overdosing the calcium stearate lubricant causes plate out on the mold surface, which ruins the surface finish of the parts. Frequent cleaning becomes necessary to maintain the required finish.