Meaning
An alpha-olefin chemical used as a comonomer in the production of high-density polyethylene and linear low-density polyethylene. The addition of 1-butene creates short ethyl branches on the polymer backbone. These branches disrupt the regular packing of polymer chains, which lowers the density compared to homopolymer grades.
Producers select this specific comonomer when cost efficiency is the primary driver for general purpose film or injection molding resins.
Comonomer Function
Short chain branches result from the incorporation of this four-carbon molecule into the polyethylene chain. While 1-butene improves stress crack resistance relative to homopolymers, it typically offers lower mechanical performance than higher alpha-olefins like hexene or octene. Moulders find that resins made with this comonomer often process with higher stiffness but lower dart impact strength in blown film applications.
The resulting products are suitable for grocery sacks and liners where tear strength requirements are moderate.
Economic Impact
Lower procurement costs make this the standard choice for commodity-grade linear low-density polyethylene. Because the molecule is smaller and easier to handle in gas-phase reactors, it remains the most common additive for price-sensitive applications. Switching from this material to a higher olefin increases the raw material cost per pound.
Processing Variable
Polymerization occurs through a catalyst-driven process where the ratio of comonomer to ethylene determines the final density. If the 1-butene concentration drifts during production, the resulting resin might fail to meet the target density specification on the material datasheet. Precise control of the feed rate prevents shifts in the melting point of the final resin.